The Siemens Circuit Breaker 10kA 1P+N C 4A is part of the Siemens 5SY4 series, developed to protect electrical installations against overload and short circuit. It has a breaking capacity of 10 kA and a C characteristic, making it suitable for general circuits with moderate inrush currents.

The breaker is 1+N pole and intended for 230 V installations. The compact design with a built-in depth of 70 mm makes it easy to integrate into standard panel systems. It is mounted on a DIN rail and can be combined with various accessories such as remote releases, residual current modules, and signal modules.

The product is manufactured in accordance with the IEC 60898 standard, ensuring compatibility and safety in low-voltage installations. This makes it suitable for residential, commercial, and industrial environments where reliability and flexibility are required.

The Schneider Electric Acti9 iC60N circuit breaker is designed to protect electrical circuits against both short-circuit currents and overloads. It has four poles (3P+N) and a rated current of 32 amperes, making it suitable for many types of installations in low-voltage systems.

The circuit breaker has a C characteristic, which means it reacts quickly in the event of a short circuit, but at the same time allows short-term inrush currents from motors and similar loads. The double terminal makes it possible to connect both cable and busbar separately, which facilitates installation and maintenance.

With the VisiTrip™ indicator, faults can be quickly located, as a visual marking on the front shows which unit has tripped. The VisiSafe™ function ensures that the circuit is completely disconnected when the breaker is in the open position, increasing safety during work on the installation.

The unit has a compact design with a width of 72 mm and meets the requirements of both IEC/EN 60898-1 and IEC/EN 60947-2 standards. The terminals are IP20B-protected, reducing the risk of contact with live parts during installation and operation.

Eaton Circuit Breaker 16A 3P+N C 4M 6KA is a compact and efficient protection device that safeguards electrical circuits against overload and short circuit. It is intended for use in both private and commercial installations where operational reliability and safety are required.

The breaker has a C characteristic, which means it is suitable for circuits with moderate inrush currents, such as lighting, sockets, and small motors. The four-pole design (3P+N) makes it suitable for three-phase systems with a neutral conductor.

With a breaking capacity of 6 kA and a rated current of 16 amperes, it provides stable and safe disconnection in the event of fault currents. The product features a modular design with four modules (4M), making it easy to install in standard panel systems.

Hager Circuit Breaker 3P+N 50A C curve is a four-pole circuit breaker designed for use in electrical panels and distribution boards. It protects electrical circuits against overcurrent and short circuit and is suitable for installations where both phase and neutral disconnection are required.

The breaker has a rated current of 50 amperes and a C-trip characteristic, which means it reacts quickly in the event of a short circuit but allows short-term inrush currents from, for example, motors. It is rated for a breaking capacity of 6 kA and occupies four module spaces (4M) in the panel.

The product is part of Hager’s range of modular protection components, known for their reliability and compatibility with standardised panel systems.

ABB S202-C6 is a 2-pole circuit breaker with C-characteristic, developed to protect electrical circuits against overcurrent and short circuit. It has a rated current of 6 amperes and a breaking capacity of 6 kA in accordance with the EN60898 standard.

The breaker is intended for use in 230/400V AC installations and can also handle up to 60V DC per pole. It is designed to operate stably in a temperature range from -25 °C to 55 °C, making it suitable for both private and industrial environments.

With a width of 35 mm and a mounting depth of 68 mm, it fits standard 35 mm DIN rails. The product has IP20 protection and belongs to protection class III, providing a safe and reliable level of electrical isolation.

The circuit breaker is part of ABB’s S200 series, known for its modular construction and easy installation. It can be used in panels where precise and fast disconnection is required in case of fault current.

The Siemens Circuit Breaker 6kA 1P C 10A is a compact and robust circuit breaker designed to protect electrical circuits against overload and short circuit. It has a breaking capacity of 6 kiloamperes and is intended for use in 230/400 V AC systems.

The circuit breaker is 1-pole and has a C characteristic, which means it is suitable for circuits with moderate inrush currents, such as lighting and general sockets. The rated current is 10 amperes, making it suitable for standard installations in both residential and commercial environments.

With a mounting depth of 70 mm, it fits into most panel systems and can be easily integrated into existing installations. Siemens' design ensures stable and reliable operation over time.

Schneider Electric Acti9 iC60N 3P 32A is a circuit breaker designed to protect electrical circuits against both short-circuit and overload currents. It has three poles and a rated current of 32 amperes, making it suitable for many types of installations in low-voltage systems.

The breaker has a C-characteristic, which means it reacts quickly to high currents but at the same time allows short-term inrush currents from motors and similar loads. The double terminal design makes it possible to connect both cable and busbar separately, which facilitates installation and maintenance.

The Acti9 series is equipped with a VisiTrip™ indicator that shows if the device has tripped, as well as a VisiSafe™ function that increases safety when working on the panel. The terminals are IP20B protected to prevent accidental contact with live parts.

The product complies with international standards such as IEC/EN 60898-1 and IEC/EN 60947-2 and is manufactured in accordance with the RoHS directive. With a width of 54 mm and a weight of 375 g, it is compact and easy to integrate into existing panel systems.

Eaton Circuit Breaker 32A 3P+N C 4M 6KA is a compact and efficient protection device that safeguards electrical installations against overload and short circuit. It is intended for use in residential, office, and commercial buildings where operational reliability and safe disconnection are required.

The breaker has a C characteristic, which means it is suitable for circuits with moderate inrush currents, such as lighting, sockets, and small motors. The four-pole design (3P+N) makes it suitable for three-phase systems with a neutral conductor.

With a breaking capacity of 6 kA and a rated current of 32 amperes, it provides stable and safe protection against electrical faults. The product features a modular design that fits standard DIN rail panels, making installation simple and flexible.

Hager Circuit Breaker 3P 16A C curve 6kA is a three-pole circuit breaker used to protect electrical installations against overcurrent and short circuit. It is intended for AC systems with a voltage between 230 and 400 volts.

The breaker has a C-curve, which means it is suitable for circuits with moderate inrush currents, such as lighting, sockets and small motors. The rated current of 16 amperes makes it suitable for common loads in residential and commercial applications.

With a breaking capacity of 6 kA, it can handle short-term fault currents without damage, and its modular design makes it easy to install in standard panel systems. The product is supplied as a single unit and is part of Hager's range of modular protection components.

The Siemens 5SY6640-7 is a miniature circuit breaker used to protect electrical circuits against overload and short circuit. It is designed to handle a rated current of 40 amperes and has a breaking capacity of 6 kiloamperes in accordance with EN 60898.

The fuse is designed as a four-pole model (3P+N), making it suitable for three-phase installations with a neutral conductor. It can be used in both commercial buildings and industrial environments where operational reliability and standardised protection are required.

The unit is halogen-free and meets the requirements for main switches in accordance with EN 60204-1, making it suitable for use in machine installations and panels where safety and material selection are crucial.

The Schneider Electric Acti9 iC60N 2P 32A is a circuit breaker that protects electrical installations against both short-circuit and overload currents. It is constructed with double terminal clamps, allowing both cable and busbar connection separately, which facilitates installation and maintenance.

The breaker has a C-characteristic and a rated current of 32 amperes at 230 volts. It has a short-circuit breaking capacity of 6/10 kA, making it suitable for many types of standard installations in buildings and panels.

The product is equipped with Schneider Electric's patented VisiTrip™ indicator, which shows if the unit has tripped, as well as the VisiSafe™ function, which increases safety during maintenance. The terminals are IP20-protected to prevent accidental contact with live parts.

The Acti9 iC60N series complies with both IEC/EN 60898-1 and IEC/EN 60947-2 standards, ensuring compatibility and reliability in professional electrical installations.

Hager Circuit Breaker 1P 16A C curve 6kA is a single-pole breaker that protects electrical circuits against overload and short circuit. It is intended for installation in distribution boards and is suitable for both residential and commercial applications.

The breaker has a rated current of 16 amperes and a C-curve characteristic, which means it can handle moderate inrush currents from, for example, motors or lighting installations without tripping unnecessarily.

With a breaking capacity of 6 kA, it can safely interrupt high short-circuit currents, and it is designed for operating voltages between 230 and 400 volts AC. The unit occupies one module space in the distribution board (1M).

The product is part of Hager’s range of modular protection components, known for reliability and easy installation on standard DIN rails.

The Siemens 5SY6632-7 is a miniature circuit breaker from the SENTRON series, developed to protect electrical installations against overload and short circuit. It has a breaking capacity of 6 kA and is designed for 400V systems.

The breaker is 3+N-pole and has a rated current of 32 amperes with a C characteristic, making it suitable for circuits with moderate inrush currents, such as motors and lighting systems.

The unit has a mounting depth of 70 mm and is designed with a uniform modular system, making it easy to install and expand with accessories as needed.

With its robust design and Siemens’ renowned quality, this circuit breaker ensures stable and safe operation in many types of electrical installations.

Schneider Electric C120N 3P 100A is a three-pole circuit breaker used to protect electrical circuits against short-circuit and overload currents. It is designed to meet the requirements of IEC/EN 60947-2 and is suitable for use in industrial environments.

The breaker has a rated current of 100 amperes and a C-characteristic, which means it reacts quickly to high current peaks while allowing short-term inrush currents from motors and similar loads.

With a breaking capacity of 10 kA at 230/400 V and IP20 protection, it is suitable for installations requiring both safety and operational reliability. It can also be equipped with auxiliary units for fault tripping and indication.

Compact dimensions with a width of 81 mm, height of 73 mm, and weight of 615 g make it easy to integrate into panels and distribution systems.

The Siemens Circuit Breaker 230V 10kA 1+N-P C 16A is designed to protect electrical systems against overcurrent and short circuit. It is part of Siemens’ 5SL series, known for its operational reliability and easy installation in modular panels.

The breaker has a rated current of 16 amperes and a breaking capacity of 10 kiloamperes, making it suitable for both residential and small commercial installations. It uses a C characteristic, which means it reacts quickly to short circuits but allows short-term inrush currents from, for example, motors.

With its 1+N-pole design, it protects both phase and neutral, and it can be combined with additional modules such as auxiliary contacts, fault indicators or remote releases. This makes it flexible in use and easy to adapt to different installation needs.

The circuit breaker has a compact design that fits standard DIN rail panels and is made of materials that ensure long service life and stable operation under varying loads.

The Schneider Electric Acti9 iC60N circuit breaker is designed to protect electrical circuits against both short circuits and overloads. It has 3 poles plus neutral (3P+N) and is rated at 10 amperes at 230 volts.

The unit is equipped with a C characteristic, making it suitable for circuits with moderate inrush currents, typically found in standard installations and small motor loads.

The circuit breaker has double terminal clamps, allowing both cable and busbar connections separately. This facilitates installation, maintenance, and replacement in panels.

With the VisiTrip™ indicator, faults can be quickly located, while the VisiSafe™ function increases safety by showing when the circuit is completely disconnected. The terminals are IP20B-protected to prevent accidental contact with live parts.

The product complies with international standards IEC/EN 60898-1 and IEC/EN 60947-2 and is manufactured in accordance with the RoHS directive.

The Siemens Circuit Breaker 10kA 1P+N C 6A is part of the Siemens 5SY4 series, developed to protect electrical circuits against overload and short circuit. It has a breaking capacity of 10 kA and a C characteristic, making it suitable for general installations with moderate inrush currents.

The breaker is 1+N pole and intended for 230 V installations. The compact design with a built-in depth of 70 mm makes it easy to integrate into standard panel systems. It is mounted on a DIN rail and can be combined with various accessories such as remote releases, residual current modules, and signal modules.

The circuit breaker is manufactured in accordance with the IEC 60898 standard, ensuring compatibility and safety in low-voltage installations. It is suitable for residential, commercial, and industrial environments where operational reliability and quick disconnection in case of fault current are required.

Schneider Electric Acti9 iC60N 1P+N 4A is a circuit breaker designed to protect electrical circuits against both short-circuit and overload currents. It uses a C-characteristic, making it suitable for general installations with moderate inrush currents.

The breaker has double terminal clamps, allowing both cable and busbar to be connected separately. This facilitates installation, maintenance and possible replacement. The terminals are IP20 protected, reducing the risk of accidental contact with live parts.

The product is equipped with Schneider Electric's patented VisiTrip™ technology, which provides a visual indication on the front when the device has tripped due to a fault. At the same time, the VisiSafe™ function contributes to increased safety when working on the installation.

The Acti9 iC60N series complies with both IEC/EN 60898-1 and IEC/EN 60947-2 standards, ensuring compatibility and reliability in professional electrical installations.

The Siemens 5SY6320-7 is a 3-pole circuit breaker with a rated current of 20 amperes and a breaking capacity of 6 kA. It is designed for 400V systems and uses a C characteristic, making it suitable for general circuits with moderate inrush currents.

The breaker is part of the Siemens Sentron 5SY series, known for high quality and reliable protection against overload and short circuit. It can be mounted on a DIN rail and combined with various accessories such as remote releases, fault signalling contacts and undervoltage releases.

With a built-in depth of 70 mm and an enclosure rating of IP20, it is suitable for both industrial and building installations where safety and flexibility are required.

The Schneider Electric Acti9 iC60N circuit breaker is designed to protect electrical circuits against both short-circuit currents and overloads. It is part of the Acti9 series, known for its reliability and modular construction.

This model is 1-pole and has a rated current of 13 amperes with C characteristic, making it suitable for circuits with moderate inrush currents. It operates at a nominal voltage of 230 volts and has a breaking capacity of 6/10 kA.

The circuit breaker is equipped with double terminal clamps, allowing both cable and busbar connection separately. This facilitates installation, maintenance and replacement. The terminals are IP20B protected, reducing the risk of accidental contact with live parts.

The product is equipped with a VisiTrip™ indicator that shows if the device has tripped, as well as a VisiSafe™ function that increases safety when working on the installation. It meets the requirements of standards IEC/EN 60898-1 and IEC/EN 60947-2.

With a width of 18 mm and a weight of 500 grams, it is compact and easy to integrate into panels and distribution systems where space is limited.

The Siemens 5SY6606-7 is a circuit breaker from the SENTRON series, developed to protect electrical circuits against overload and short circuit. It has a breaking capacity of 6 kA and is constructed as a 3+N-pole unit, making it suitable for three-phase installations with a neutral conductor.

The breaker is equipped with a C characteristic, which means it reacts quickly in the event of a short circuit, while still allowing short start-up currents from motors and other loads without tripping unnecessarily.

The unit is designed for 400V systems and has a compact depth of 70 mm, making it easy to install in standard distribution boards. It can be expanded with accessories from Siemens’ SENTRON series for additional functionality.

The circuit breaker is built with a robust design that ensures long service life and stable operation under varying load conditions.

Schneider Electric Acti9 iC60N 3P 50A is a 3-pole circuit breaker with a C-characteristic that protects electrical circuits against both short-circuit and overload currents. It is intended for 230 V installations and has a breaking capacity of 6/10 kA.

The breaker is equipped with double terminal clamps, allowing both cable and busbar connections separately. This facilitates installation, maintenance, and replacement in panels and distribution systems.

The VisiTrip™ indicator clearly shows if the device has tripped, making troubleshooting faster. At the same time, the VisiSafe™ function contributes to increased safety by ensuring that the circuit is completely disconnected during maintenance.

The device complies with international standards such as IEC/EN 60898-1 and IEC/EN 60947-2 and has IP20 protection against accidental contact. The compact design with a width of 54 mm makes it suitable for installations with limited space.

The Siemens 5SL4102-7 is a circuit breaker intended for the protection of electrical circuits in both residential and industrial installations. It has a breaking capacity of 10 kA and a C characteristic, making it suitable for circuits with moderate inrush currents.

The breaker is 1-pole and rated for 2 amperes, making it suitable for smaller loads and control circuits. It is designed for DIN rail mounting, ensuring quick and safe installation in panels.

With a protection class of IP20, the component is designed for use in enclosed panels, where it provides reliable protection against electrical faults and contributes to the safe operation of the installation.

Schneider Electric Acti9 iC60N 3P+N 16A is a circuit breaker designed to protect electrical circuits against both short-circuit and overload currents. It is part of the Acti9 series, known for its high safety and reliability in professional installations.

The breaker has three poles plus neutral (3P+N) and a rated current of 16 amperes. It is equipped with a C-characteristic, making it suitable for circuits with moderate inrush currents, typically found in standard building installations.

The unit has double terminal clamps, allowing both cable and busbar connections separately. This facilitates installation, maintenance, and replacement. The terminals feature IP20B protection, preventing accidental contact with live parts when the screws are tightened.

The Acti9 iC60N is equipped with a VisiTrip™ indicator that shows if the unit has tripped, as well as a VisiSafe™ function that increases safety during work on the installation. The product complies with standards IEC/EN 60898-1 and IEC/EN 60947-2.

With a width of 72 mm, depth of 78.5 mm, and height of 91 mm, it is compact and easy to integrate into panels. It can be used in temperature ranges from -35 °C to 70 °C and stored down to -40 °C. The unit is RoHS compliant and weighs 250 grams.

Schneider Electric Acti9 NG125N C 63A 4P is a circuit breaker designed to protect electrical circuits against overload and short circuit. It uses thermal-magnetic technology, which combines fast response to short circuits with precise protection against prolonged overcurrent.

With a rated current of 63 amperes and a breaking capacity of up to 50 kA, it is suitable for demanding installations where high safety and reliability are required. The breaker has a C characteristic, which means it is suitable for circuits with moderate inrush currents, such as lighting and general motor loads.

The unit is made of black plastic with IP20 protection and is intended for installation in distribution boards. It operates at a rated voltage of up to 500 V and a frequency of 50–60 Hz. The product is certified according to EN/IEC 60947-2 and can be used in environments with operating temperatures from -30 °C to 70 °C.

With four poles and compact dimensions of 108 × 81 × 103 mm and a weight of 960 g, the NG125N is a solid and space-saving solution for both commercial and industrial installations.

The Schneider Electric Resi9 XP MCB/circuit breaker is a low-voltage miniature circuit breaker (MCB) developed to protect electrical circuits against short circuits and overloads. It is designed as a 3P+N breaker with three protected poles and a rated current of 13 amperes.

The breaker has a C-characteristic, which means it is suitable for circuits with moderate inrush currents, typically found in residential installations. The rated short-circuit breaking capacity (Icn) is up to 6,000 amperes at 400 volts AC, and it meets the requirements of the EN/IEC 60898-1 standard.

The Resi9 XP series is designed for use in homes and small buildings. The unit has a clear ON/OFF indicator and toggle control for manual operation. It can be mounted on a DIN rail and has tunnel-type terminal connections both at the top and bottom.

The connection supports rigid copper cables from 1 mm² to 16 mm² as well as flexible cables from 1 mm² to 10 mm², with or without ferrule. The rated operational voltage (Ue) is up to 400 VAC, the insulation voltage (Ui) up to 440 VAC, and the impulse withstand voltage (Uimp) is 4 kV.

The breaker has an electrical lifetime of up to 7,500 cycles and a mechanical lifetime of up to 20,000 cycles. It is classified in limitation class 3 and has IP20 protection, which increases to IP40 when mounted in a modular panel.

The housing is white (RAL 9003), and the unit measures 54 mm in width, 81 mm in height and 73.5 mm in depth. It weighs 320 grams and has a heat dissipation of 2.8 watts. The operating temperature ranges from -25°C to +60°C, and the storage temperature from -40°C to +60°C.